Valve spring provide support to the valve in the cylinder head as well as provide a spring force to...
Author - Anand Gautam
How compression ratio of main engine can be adjusted?
Adjustment of main engine compression ratio Piston rod is fastened to the crosshead pin in a...
What is the difference between Mean Effective Pressure (MEP) and...
Mean Effective Pressure It is the theoretical constant pressure which may be assumed acting on the...
What is the routine Anchor Windlass maintenance?
Windlass is a very critical equipment for anchoring and mooring purpose. It is exposed to heavy...
What is Tappet clearance? How to take Tappet clearance?
Tappet clearance: this is the clearance available between the rocker arm tip and valve stem when...
What is Oil Mist Detector (OMD) ? Explain its construction and...
The purpose of this detector is to detect the presence of oil mist at the concentration-levels well...
A shell & tube type cooler tubes are leaking, what is the...
Before jumping to any conclusions it is prudent to check where the leaks are from. It could be from...
Draw and explain the valve timing diagram of 2 Stroke diesel...
Starting at TDC, combustion is already under way and the exhaust opens (EO) at 110–120° ATDC to...
Explain the procedure of removal of liner in main engine...
Here I have referred to a particular Sulzer RTA Engine. You should consult your manual also as...
What is the material of inlet and exhaust valves, piston, liner...
Inlet valve Seat is stellite coated, valve is nickel based alloy, spindle is nimonic...