-
SAFE STOWAGE AND SECURING OF METAL SCRAP IN BULK
13.1.1 Introduction
13.1.2 Recommendations
- APPENDIX A: Calculation for loading sequences
- APPENDIX B: Empty sheets for calculation of loading Sequences
- APPENDIX C: Loading sequences for specific ports
- APPENDIX D: Maintenance of cargo securing equipment
You may also know :
The manual has been prepared in accordance with the following rules and regulations:
- International Convention for the Safety of Life at Sea,1974 (SOLAS), Consolidated Edition 2004, chapter VI, Part B, Reg. 6 & 7 and Chapter. VII, Part A-1, Reg. 7.2.2.
- Code of Practice for Solid Bulk Cargoes (BC Code), 2001 Edition IMO 2002.
- Code of Practice for the Safe Loading and Unloading of Bulk Carriers (BLU Code) (IMO Res. A862(20)).
- IACS URS1: Requirements for Loading Conditions, Loading Manuals and Loading Instruments.
- IACS URS1A: Additional Requirements for Loading Conditions, Loading Manuals and Loading Instruments for Bulk Carriers, Ore Carriers and Combination Carriers.
- IACS URS17: Longitudinal Strength of Hull Girder in Flooded Condition for Bulk Carriers (IACS 2003, Rev. 5). (Please refer to note in Sect. 6.2).
- IACS URS25: Harmonized Notations And Corresponding Design Loading Conditions For Bulk Carriers.
- IACS: Bulk Carriers – Guidance and Information on Bulk Cargo Loading and Discharging to Reduce the Likelihood of Over-stressing the Hull Structure. (IACS 1997).
- Code of Safe Practice for Cargo Stowage and Securing (CSS Code), (IMO Resolution A.714(17)).
- Code of Safe Practice for Ships carrying Timber Deck Cargoes, (IMO Resolution A.715(17)),
- IMO/MSC/Circular 745 (13 June 1996), Guidelines for the Preparation of the Cargo Securing Manual“
- International Code for the Safe Carriage of Grain in Bulk (International Grain Code), IMO 1991.