- Adjust the length of protrusion from the lower part of the drawing-out bolt 3 to about 60mm, and lock the drawing-out bolt 3 with the lock nut 8 .
- While supporting the cylinder liner to prevent it from making contact with the cylinder, tighten the nut 5 .
- Fit the cylinder liner in the stepped part on the lower side of the upper implement 2 , and lock the cylinder liner with the drawing-out tools.
- Attach a wire rope to the upper implement 2 , and lift the cylinder liner.
About the author
Anand Gautam
Anand Gautam is a marine engineer, Graduated from M.E.R.I. Mumbai. He likes to sail onboard ship and is one who is passionate about his job. He loves to share his knowledge, information, and ideas to everyone in a simplified way just for his satisfaction.
