How piston cooling is done in main engine? How compression ratio of main engine can be adjusted?
Author - Anand Gautam
How will you pressure test the piston of main engine?
Piston is pressure tested to test for any leakage at contact surfaces and also between sealing...
How will you grind suction/exhaust valve of an Auxiliary Engine?
If there is a flaw in the valve seat of suction and exhaust valve, valve seat must be grinded...
What things you will check in suction and exhaust valve of...
After removal of cylinder head, suction and exhaust valve must inspected thoroughly. Checks/...
How to identify inlet valve and exhaust valve of an AE ?
Take care not to confuse the suction and exhaust valves as they are of the same shape but made of...
What checks should be performed on liner of auxiliary engine...
Liner must be inspected thoroughly after its removal to determine the service condition of the...
Explain the procedure of removal of liner in auxiliary engine.
Auxiliary engine cylinder liner overhaul interval: Liner inner diameter should be checked after...
Explain the procedure of removal of piston in auxiliary engine.
The frequency of piston drawing-out check varies according to the daily maintenance, especially the...
Explain the procedure of removal of liner in main engine (MAN B...
Here I have referred to a particular MAN B & W MC Engine. You should consult your manual also...
Explain the procedure of removal of liner in main engine...
Here I have referred to a particular Sulzer RTA Engine. You should consult your manual also as...