What is the baltic exchange questionnaire for dry cargo ship in detail ?

 

Avg Ht of hopper side above cargo hold tank top =7.2M for HOLD 1

 

Avg Ht of hopper side above cargo hold tank top =8.8 M for HOLD 9

    5.17 Flat floor measurement of cargo holds at tank top: L x W     5.18 Are vessel’s holds electrically ventilated?       If yes, state number of air-changes per hour basis empty holds:     5.19 Type of hold paint:     5.20 Is vessel fitted for carriage of grain in accordance with chapter V1 of SOLAS 1974 and amendments without requiring bagging, strapping and securing when loading a full cargo (deadweight) of heavy grain in bulk (stowage factor 42 cu. Feet) with ends untrimmed?     5.21 Is the vessel fitted with A60 Steel Bulkhead?     Deck and Hatches   5.22 Number of hatches:     5.23 Make and type of hatch covers:     5.24 Hatch dimensions: (Length X Breadth)     5.25 Hatch span (distance from front of forward hatch#1 to aft of rear hatch#9):     5.26 Strength of hatch covers:     5.27 Number, diameter and location of cement holes     5.28 Distance from ship’s rail to near and far edge of hatch covers/coaming near and far (Please advise the minimum width clear of any obstruction for each hold):     5.29 Distance from bow to fore of 1^st hold opening:     5.30 Distance from stern to aft of last hold opening:     5.31 State deck strength:     Ballast   5.32 Capacity of ballast tanks (100%):     5.33 Ballast holds capacity, state which hold(s):     5.34