GENERAL ENGINEERING KNOWLEDGE MOTOR ENGINEERING
Author - Anand Gautam
What is a Fitted Bolt?
Fitted bolts are interference fit bolts. Normal bolts when tightened are liable to reduction in...
What is Oil Mist Detector (OMD) ? Explain its construction and...
The purpose of this detector is to detect the presence of oil mist at the concentration-levels well...
A shell & tube type cooler tubes are leaking, what is the...
Before jumping to any conclusions it is prudent to check where the leaks are from. It could be from...
Draw and explain the valve timing diagram of 2 Stroke diesel...
Starting at TDC, combustion is already under way and the exhaust opens (EO) at 110–120° ATDC to...
What things you will check in suction and exhaust valve of...
After removal of cylinder head, suction and exhaust valve must inspected thoroughly. Checks/...
Explain the procedure of removal of liner in main engine...
Here I have referred to a particular Sulzer RTA Engine. You should consult your manual also as...
Operational Procedure
How to prepare a DB fuel oil tank for a survey/inspection?
What is the material of inlet and exhaust valves, piston, liner...
Inlet valve Seat is stellite coated, valve is nickel based alloy, spindle is nimonic...
What are the causes of fatigue failure?
Causes of fatigue failure are: Engine operating with excessive cylinder pressures Tie bolt tension...